![]() |
#11
|
||||
|
||||
![]()
Whoa! Large 1/8" washer between the hanger & the mount? All this time, I thought they were referring to putting the washers between the block & the mount.
|
#12
|
||||
|
||||
![]()
There is only one bolt between hanger and mount. Two bolts for the block to the mount. Reduces washer requirement by 50%.
Correct me if I am wrong but 1/8" between hanger and mount will create more lift than between block and mount.
__________________
Duke B382002037LRXFE, TAC #739, Born on 5/3/66 454 HP, 445 lbs/torque Gentle as a kitten that will rip your face off when the right pedal is put to the floor. |
#13
|
||||
|
||||
![]()
See attached picture of what we have done to fit the derale fan
2 spacer 1/8 thick to go on the motor mount 1 1/4 inch thick spacer CNC aluminium goes betwen the fan and the pulley with bring the fan 1/4 inch further forward it will now clear the bottom pulley and the fan belt !!! I Use Top Hose Dayco 70627 Gilles
__________________
1967 Tiger MKII 1987 Chevy S10 Last edited by tigresunbeam; 03-24-2018 at 05:34 PM. Reason: add ! |
![]() |
Thread Tools | |
Display Modes | |
|
|